Elegant and Stylish Fully Steel Checmical Lab Fume Hood

• Customization: Available
• Material: Steel
• Type: Slit Type
• Model NO.: #LBLS2536
• Function: Exhaust
• Feature: Corrosion Resistance, Heat Resistant, Acid & Alkali Resistant, Fireproof, Explosion Proof
• Hood Type: Standard
• Color: White
• Customized: Customized
• Condition: New
• Funtion: School,Hospital
• Structure: Knock Down
• Packing: Carton
• Brand: Bonlab
• Transport Package: Cartons
• Specification: Customized
• Trademark: OEM
• Origin: Jinhua, Zhejiang
• HS Code: 9403100000
• Production Capacity: 5000PCS/Month

Product Description

 

ORGINAL DESIGN
              -T3 Fully Steel Fume Hood

The most common type of fume hood, bench top units are installed on top of lower base units and most typical cabinets (base cabinets).
Benchtop fume hood are one of the most popular models of fume hoods available for laboratory use. User sit on a laboratory bench, also known as a workstation or utility table. This makes it easy to sit or stand in front of the fume hood and conduct your work through the opening created by lifting the vertical sash.

 

Fume hoods are designed to provide personnel protection from toxic or volatile chemicals by continuously delivering airflow away from the user to the work area. Air is then filtered and/or treated by the building's exhaust system before exiting the facility (ducted) or by filters contained in the fume hoods, which clean the contaminated air and recirculate it directly back into the laboratory (ductless).
 

Different Types of Fume Hoods

Every lab is unique. That's why fume hoods come in a wide variety of sizes and functionalities so that you can find one that fits your exact needs. When comparing fume hoods, here are some of the different types to consider:

• Ducted fume hoods: A ducted fume hood connects to your building's HVAC system, which then carries the air outside. When choosing a ducted fume hood, it will be necessary to work with your building's infrastructure team to ensure the ventilation system can provide the required volume of air to ventilate the hood properly. Because the ducted fume hood is connected to your duct system, keep in mind that you may have limited options as to where you can place the unit.
• Ductless fume hoods: A ductless fume hood is a freestanding unit that does not require your building's HVAC system. Instead, the hood uses a carbon-based filter to absorb fumes and vapors. The filtered air then recirculates back into the workspace. A secondary particulate-trapping HEPA filter can be added after the carbon filter to provide exhaust air suitable for cleanroom applications. Unlike a ducted fume hood, a ductless fume hood can be placed anywhere and easily moved.
• Light-duty hoods: These smaller, basic hoods are used to vent non-toxic materials such as heat, steam, odors and smoke.
• Specialized hoods: There are several fume hoods available for specialty applications. Acid digestion hoods are built with chemical-resistant materials to avoid corrosion, while radioisotope hoods are built out of stainless steel to prevent the absorption of radioactive materials. For educational settings, full-view hoods have transparent backs and sides for enhanced visibility when conducting demonstrations or monitoring students, along with multiple openings so students can work from both sides of the hood.

Fume hoods have distinct physical characteristics. The base of the fume hood usually looks like a typical lab bench, and may have storage built into it, above the floor. On top of and connected to the bench is a very large enclosure called a cabinet. The cabinet will have a movable door, or sash, on the front that can be raised or lowered to provide access to the worktop portion of the fume hood. Openings around the edges of the worktop and/or at the top of the cabinet allow for the removal of gases in the cabinet. Experiments are performed inside the cabinet with the sash as low as possible so as to protect the experimenters.
 

Fume hoods provide protection from more than just dangerous gases. The enclosed nature of the cabinet helps to protect experimenters from being hurt by debris if something explodes or splashes. Fume hoods are also usually made of flame-retardant materials, so unexpected fires tend not to be as damaging as they would be in an open area.

Most fume hoods have numerous features built into them to assist with experimentation. Vapor-sealed lights allow experimenters to see what they are doing. Electrical outlets both inside and outside the fume hood are common, and allow for electronic devices to be easily used during the experiment. Vacuum pumps are also common, and allow for low-pressure or vacuum experiments to be conducted. Gas outlets that can be connected to various tanks and flows are useful for specific experiments, as are water faucets and drains.

 Steel Chemical Fume Hood Cupboard Cabinet
-Material, structure...
The left and right side panels of the main body, the front steel plate, the back plate, and the top plate are made of 1.0mm thick steel plate, and 2000W imported from Germany is completely self-contained.
Automatic CNC laser cutting machine blanks the material, and the bending adopts a fully automatic CNC bending machine one-time integrated bending forming, and the surface is made of epoxy resin powder
Automatic spraying and high temperature curing with static current water line.
The inner lining board adopts 5mm thick core anti-fold special board, which has good anti-corrosion and chemical resistance. The deflector is optional, and the fixing parts are made of anti-corrosion polyvinyl chloride material in one piece.
Equipped with fixed windows + 2 moving windows up and down, the glass guide grooves of the moving windows are made of PP material, and the sliding door is light and silent. The handle PP is integrally formed, embedded with 5mm tempered glass, the door opening height is 1450mm, and the door opening height is 1450mm, and the upper and lower transmission device of the sliding door adopts the pulley + wire rope configuration, and the sliding door guide device is made of corrosion-resistant PVC material .
The fixed window frame is made of steel plate and sprayed with epoxy resin, and 5mm thick tempered glass is embedded in the frame.
All the internal connection devices of the connection part are hidden and arranged and anti-corrosion. There are no exposed screws, and the external connection devices are all anti-corrosion.
Learn corroded stainless steel parts and non-metallic materials.
The exhaust outlet adopts a gas collecting hood integrally formed with the top plate, and the air outlet has a circular hole with a diameter of 250mm and is connected by a sleeve to reduce gas turbulence.
 
-Accessories...
The inner side of the side board can be equipped with an optional waterway (one-time molded PP small cup tank, acid and alkali resistance, corrosion resistance. Single-port copper valve core laboratory special faucet.)
The circuit control panel adopts a liquid crystal display panel (the opening stroke of the damper can be set, and the electric damper can be opened quickly in 6 seconds), 8 buttons (power, setting, confirm, lighting, backup, fan, damper +\-key) . Illumination LED white light fast start type, installed on the top of the fume hood, long service life. The socket is equipped with four 10A 220V five-hole multi-function sockets. The line uses Chint 2.5 square copper core wire.
The hinge of the lower cabinet door adopts the "DTC brand" 110-degree straight bending hinge, which has a long service life and is easy to disassemble and assemble.
Other maintenance windows are reserved in the back panel of the lower cabinet to facilitate troubleshooting. 4 holes are reserved on the left and right side panels to facilitate the installation of cork and other facilities.
 

How Does a Fume Hood Work?

The primary purpose of the fume hood is to contain gases, vapors and fumes and then exhaust them out of the area. The fume hood begins this process by pulling room air into and through the fume. The air enters the hood through the sash. Depending on its design, the sash may move vertically or horizontally, or a combination of the two. The sash also acts as a barrier between the worker and the inside of the fume hood and provides limited protection.

As the air flow works its way through the middle of the fume hood, it pushes the harmful gases, vapors and fumes toward the exhaust area. This area is managed by slots and baffles which act as exit doors for the fume hood before reaching either the connected ductwork (ducted fume hood) or the fume hood filters (ductless fume hood). In many fume hoods, the slots and baffles are adjusted to allow for even air flow.

If the baffles are closed (or blocked) the exhaust path will also be blocked. But when used properly, baffles eliminate dead spots or reverse air flows which would result in a loss of containment. After air exits the fume hood it is transported through ductwork to where it is released into the atmosphere; or on ductless fume hoods, the air is filtered and recirculated back into the room.

T3 Steel Fume Hood Specifications:

T3 Steel Fume hood is suitable for the experiment of strong acid, strong alkali, strong corrosion and volatility. It can effectively protect the operator from inhaling toxic gases and protect the operator and sample safety. And dramatically reduces the risk of fire and explosion. The environment can also be protected by installing appropriate filters.

Model
External Size (WxDxH)(mm)			1200x850x2350	1500x850x2350	1800x850x2350
Max.Opening			740mm
Work Surface Height			820mm
Control System	Display		Microprocessor controller with LCD display, display the operating status of each function
Airflow System	Airflow Velocity		0.4~0.8 m/s, speed adjustable
Cabinet Construction	Main Body		Made of Porcelain white PP, thickness 8mm, resistant to strong acid, alkali and anti-corrosion.
	Work Surface		Chemical resistant phenolic resin
	Front Window		Manual, 5mm toughened glass, height adjustable.Resistant to acid and alkali
Electrical System	LED Lamp		20W×2
	Blower		Built-in PP centrifugal blower(2 blowers for FMH-1800DP only); Speed adjustable
	Consumption		450W	450W	450W
			Not include socket loading power consumption
	Power Supply		AC220V±10%, 50/60Hz; 110V±10%, 60Hz
Illumination			≥900Lux
Sound Emission			≤68dB(A)
Standard Accessory			1.Base Cabinet;
			2.LED Lamp;
			3.Waterproof Socket×2;
			4.Water Tap (PP);
			5.Gas Tap (PP);
			6.Gas & Water Remote Control Valve;
			7.Water Sink;
			8.Work Table: Solid physicochemical board, resistant to acid and alkali;
			9.PP Centrifugal Blower*1(2 for FMH-1800DP only);
			10.10m PVC aluminum foil composite exhaust duct, Diameter: 250mm;
			(2 pcs of 10m exhaust duct for FMH-1800DP only,duct is retractable and can be cut freely.) Pipe strap x2 (4 pcs for FMH-1800DP only);
Optional Accessory			1. PP Work Table, epoxy resin board
			2. Active Carbon Filter;
Gross Weight (kg)		Main Body	137	155	180
		Base Cabinet	89	99	114
Shipping Size (W×D×H) (mm)		Main Body	1188x938x1612	1388x938x1612	1688x938x1612
		Base Cabinet	1188x888x1000	1388x888x1000	1688x888x1000
Shipping Volume (m³)			2.9	3.4	4.1

 

Mass Production & Laboratory Projects

 
COMPANY INFORMATION-

Packing&Loading

1.Packing method: Totally knock-down ,Standard export carton (packing with pearl foam and foam board );

2.Can Put logo on the cartons, the name of the model and details of the model such as pieces, dimension etc;

3.Can have a product sketch printed outside of the package;

4.Can provide test report;

5.Protection packing inside, foam materials, Anti-Moisture plastic etc;

6.We can make the package as your customized design;

7.Shipping:EXW & FOB & CNF & CIF can be accept, competitive ocean freight with professional container loading team;

Our Services

1.Experienced staff answer all your reply&questions in fluent English within 24 hours.        

2.Professional knock-down design cabinet,newest design.
3.All parts 100% Antirust technology,Anti-tilt mechanism.

4.Special discount and protection of sales area provided to our distributor.

5.More than 8 years experience of steel furniture manufacture in China.

6.A team of designers and engineers are capable to create new items according to personal request.

7.Strict-Quality Control during each procedure in production.

8.ISO9001, ISO 14001 and GB/T28001 certification.

9.Welcome OEM and ODM.

10.Type Steel locker, steel wardrobe, filing cabinet, drawer-file cabinet, mobile pedestal, tambour& shutter cupboard, office table, bookcase,steel bed,lab furniture etc.

11.Direct sales by the manufacturer, which shortens the distance between the factory and consumers, and therefore reduces the product price to a considerable extent.

12.Multiple Production line and Teams, Offering you speedier delivery and dedicated craftmans to make furniture according to your requirements, no matter what surface finish color, dimensions, quantity, style or fabrics.

13.We will offer you suggestions and options in material and designs to help you lower tooling costs, saving you time by speeding up Production and Delivery, at the same time keep your design ideas intact.

14.Durable epoxy powder finish, professional washing before coating.

15.Sample available upon request.